Weigh Module MR-1S

Low-profile

Upper plate with blind hole to be loaded

Adjustable height screw against overload and overturn

Capacities (per module):2.5t-100t

Alloy steel and stainless steel optional

Assembled with compression load cell MR-1S

Description
Dimensions
Specifications
Downloads

The MR-1S weigh module is designed for dynamic weighing system, such as mixed hopper, silo, vessel and tank weighing systems. Capacity is from 1t to 100t widely. The MR-1S Series kit is ideally suited for installation in limit space

Parameter	Units	Specifications
Weighing Model No.		MR-1S
Weighing Module Material		Stainless steel
Load Cell Model No.[Option]		R510S
Rated capacity(Emax)	t	1/2.5/5/10/20/30/50/100
Rated output	mV/V	2.0 ± 0.004
Zero balance	% of Emax	± 1
Accuracy class^1）2）		C3 C5
Repeatability error	% of AL^3）	<±0.010	<±0.006
Creep; 30 minute	% of AL	<±0.017	<±0.010
Min. dead load output return (DR); 30 min	% of AL	<±0.017	<±0.010
Temp. effect on (Min. dead load output)	% of Emax/°C	<±0.0018	<±0.0014
Temp. effect on (Rated output^2）)	% of AL/°C	<±0.0012	<±0.0007
Temperature range (Compensated)	°C(°F)	-10 to +40 [+14 to +104]
Temperature range (Operating)		-40 to +65 [-40 to +149]
Temperature range (Safe storage)		-40 to +80 [-14 to +176]
Excitation voltage (Recommended)	V AC/DC	5 ~15
Excitation voltage (Maximum)		15
Terminal resistance (Excitation)	Ω	766± 5
Terminal resistance (Output)		700 ± 3
Insulation resistance @50VDC	MΩ	> 5000
Breakdown voltage	V AC	> 500
Seal type / IP rating		Hermetically welded / IP68 IP69k
Load limit (Safe)	% of Emax	150
Load limit (Ultimate)		300
Cable length	m	1-10t	15-100t
		6.0	12.0
European/OIML Approval(Cetificate Number)
European/OIML Approval(Class)
NTEP Approval(Cetificate Number)
NTEP Approval(Class)