Stainless/ alloy steel IP67 single point load cell
Suitable for the pricing scales, bench scales, belt scales etc
Maximum platform size: 400*400mm
B6E3 is a typical and standard stainless single point load cell that is high capacity and ideal for a wide range ofweighing eauipment. Hermetically sealing ensures reliability and durability. The industry standard size and mountinohole configuration makes the B6E3 is suitable for new equipment manufacturer or as a replacement for existedweighing equipment
| Specification | Value | |
| Accuracy class | C3 | |
| Maximum capacity (Emax) | kg | 20,30,50,75,100,150,200,250,300 |
| Maximum number of load cell intervals (nLC) | Vmin | Emax/10000 |
| Maximum number of verification intervals | Vman | 3000 |
| Combined error | %FS | ±0.020 |
| Minimum dead load | kg | 0% |
| Creep | %FS/30min | ±0.016 |
| Temperature effect on sensitivity | %FS/10℃ | ±0.011 |
| Temperature effect on zero | %FS/10℃ | ±0.015 |
| Output sensitivity (=FS) | Mv/V | 2.0 ± 0.2/2.0±0.002 |
| Input resistance | Ω | 384±4 |
| Output resistance | Ω | 351±3.5 |
| Insulation resistance | MΩ | ≧5000(50VDC) |
| Zero balance | %FS | ±1.5 |
| Excitation, recommended voltage | V | 5~12 (DC) |
| Excitation maximum | V | 18 (DC) |
| Temperature Compensated | ℃ | -10 ~ +40 |
| Temperature range,operating | ℃ | -35 ~ +70 |
| Safe overload | %FS | 150 |
| Ultimate overload | %FS | 300 |
| Corner Correction | 0.02%load value/100mm | |
| ATEX classification (optional) | 11G ExialCT4 II1D ExiaD 20T73°II3G Ex nL IIC T4 | |
| Note:”S1″Output Sensitivity is 2.0+/-0.002mv | ||
