Material: Alloy steel ( thread)
Rated Capacity: 1KN~10KN
Calibrated based on criterion of ISO 376
IP Rating: IP66
Suitable for force measurement and overloading safety controlling
High precision by ISO 376 class 0.5, 1, 2.
S515 is a square-shaped tension & compression load cell, high-quality silica gel potting is to ensure it can work in harsh environment. Available in a wide range of capacities from 1KN to 10KN
| Parameter | Units | Specifications | |||
| Model No. | S515A | ||||
| Rated capacity (Emax) | KN | 1/2/5/10 | |||
| Accuracy class1）2） | 0.5 00 | ||||
| Min. dead load | kg | 0 | |||
| Rated output | mV/V | 3.0 ± 0.003 | |||
| Zero balance | % of Emax | ± 1 | |||
| Repeatability error | % of AL3） | <±0.010 <±0.006 | |||
| Creep; 30 minute | % of AL | <±0.017 <±0.010 | |||
| Min. dead load output return (DR); 30 min | % of AL | <±0.017 <±0.010 | |||
| Temp. effect on (Min. dead load output) | % of Emax/°C | <±0.0020 <±0.0014 | |||
| Temp. effect on (Rated output2）) | % of AL/°C | <±0.0012 <±0.0007 | |||
| Temperature range (Compensated) | °C(°F) | -10 to +40 [+14 to +104] | |||
| Temperature range (Operating) | -40 to +65 [-40 to +149] | ||||
| Temperature range (Safe storage) | -40 to +80 [-14 to +176] | ||||
| Excitation voltage (Recommended) | V AC/DC | 5 ~15 | |||
| Excitation voltage (Maximum) | 15 | ||||
| Terminal resistance (Excitation) | Ω | 384± 5 | |||
| Terminal resistance (Output) | 350 ± 3 | ||||
| Insulation resistance @50VDC | MΩ | > 5000 | |||
| Breakdown voltage | V AC | > 500 | |||
| Seal type / IP rating | Silicon rubber/IP66 | ||||
| Load limit (Safe) | % of Emax | 140 | |||
| Load limit (Ultimate) | 200 | ||||
| Material(Spring element) | Alloy steel nickel plated | ||||
| Material(Cable) | Ø5.6;4-wire;PVC | ||||
| Cable length | m | 5.0 | |||
| Weight; approx | kg | 1-5kN | 10klb | ||
| 0.8 | 1.0 | ||||
| Fatigue life | cycles @Emax | >1,000,000 | |||
| Deflection at Emax; approx | mm | < 1.0 | |||
| Barometric pressure on Zero Output | Vmin/kPa | < 1.0 | |||
1）Error due to the combined effect of non-linearity and hysteresis
2）The sum of errors due to Temperature Effect on Output comply with the requirements of OIML R60 and NIST HB44
3）AL = Applied Load
