Cptional Data update rate: 6.25 times/sec, 12.5 times/sec, 25 times/sec,50 times/sec
Two-way relay output: Two normally open contacts※ lsolated RS232 and RS485 interfaces
Three kinds of calibration methods can be adapted to many occasions※ with analog signal output: 4~20mA,0~20mA, 0~5V or 0~10V (one in fourselected)
Independent Large screen interface (current loop mode)
The indicator is an electronic weighing indicator oriented to industrialcontrol field. Signal processing using a high-precision 24-bit dedicated A/Dconverter, analog signal output using 16-bit D/A converter, with rs232/rs485serial communication interface,aluminum alloy housing ,can beconveniently embedded in the control cabinet, suitable for cement, chemicalindustry, metallurgy and other industries weighing system.
| Specification | Details |
| Accuracy Rating | n = 3000 |
| A/D Conversion | ∑-24bit |
| Division Values | 1, 2, 5, 10, 20, 50 optional |
| Input Sensitivity | > 1.5uV/e |
| Error Distribution Coefficient | pi = 0.5 |
| Sensor Excitation Power | DC 5V, 85mA |
| Number of Sensor Connections | Up to 6 (350Ω analog sensors) |
| Input Signal Range | -20mV ~ 20mV |
| Display Mode | 7-bit LED digital tube display, word height 0.56 inch, 20 light beam instructions |
| Communication Serial | RS-232 or RS-485, baud rate: 1200bps ~ 19200bps |
| Protocol | Modbus, continuous transmission |
| Relay Mode | Upper and lower limit |
| Analog Output | Fixed value output (field four select one): Current: 0mA ~ 20mA; Current: 4mA ~ 20mA; Voltage: 0V ~ 5V; 0V ~ 10V |
| Overall Dimension (H x W x D) | 87 x 172 x 105 mm |
| Installation Hole Size (H x W) | 76 x 151 mm |
| Power Supply | AC 220V, frequency 50/60Hz, max power consumption 8W |
